Detail 1: Pay attention to the ingredients of baby wipes

The ingredients determine the quality of baby wipes. In order to achieve the moisturizing, moisturizing, sterilizing and other effects required by the product, the added ingredients of each brand of wet wipes are also different. Some inferior brands of baby wipes will hurt the baby. Therefore, parents should pay attention to the product label when choosing. Add ingredients, if the label is vague or the ingredients are not suitable, do not buy. In addition, you can also pay attention to some baby wipes reviews and comments from netizens to obtain information about baby wipes.

Detail 2: Pay attention to tightness

When buying baby wipes, you also need to look at the packaging of the product. The packaging of bagged wipes should be sealed and free of damage; the packaging of boxed and canned wipes should also be complete and free of damage. Once the packaging is poorly sealed or damaged, bacteria will penetrate deep into the wipes, and the effectiveness of the sterilization and disinfection of the wipes will be high. In addition, after taking the wipes, the sealing strip should be attached immediately to avoid high temperature or direct sunlight, which will cause the wipes to dry and affect the use effect.

Detail 3: Pay attention to the feel and smell

Different brands of baby wipes vary widely in feel and smell. Some wipes are dense, some are soft, some are fragrant, and some are basically odorless. Choose baby wipes that are soft and thick to the touch that won't rub or leave debris; choose baby wipes that are unscented, so they contain fewer ingredients and are less irritating to your baby.

Detail 4: Thickness of baby wipes

The thickness of wet wipes is one of the criteria for judging the quality of wet wipes. It is generally believed that thick wet wipes have better hand feel and stronger usability, while thin wet wipes are easier to tear during use, affecting their cleaning ability. For the thickness test of wet wipes, we judge by visual observation combined with hand feel.

Detail five: product quality

Product quality not only refers to the net weight of a single piece of wet tissue, but also includes the weight of the wet tissue paper, water content and additives. You can first weigh the baby wipes just taken out to see the quality of a single piece, and then dry the wipes and weigh them to obtain the moisture content data of the wipes. Due to the different specifications of wet wipes, this data can only briefly indicate the richness of the connotation of wet wipes, and the measurement method is relatively rough, and the data can only be used as a reference.

Detail six: product wear resistance

Baby wipes must be wear-resistant in order to have a good cleaning effect, and it is also much less irritating to the baby's skin. The following test method can be used: wipe 70 times on a certain plane with a wet towel, and compare the degree of fluff on the surface of the wet towel. If there is no obvious fluff on the surface of the wet wipes after use, it can basically be considered that the quality is good.

Detail 7: Product moisturizing

Improper moisturizing refers to the water content of baby wipes. Good baby wipes can leave a protective film on the skin after wiping, protecting the baby's tender skin. Test method: first measure the humidity of the skin on the back of the hand under dry conditions, wipe the back of the hand with a wet tissue, and test the humidity of the back of the hand after 5 minutes and 30 minutes respectively. If the moisture of the back of the hand is good after 30 minutes, it is considered that the moisturizing type of this brand of baby wipes is better.

Detail 8: Pay attention to product information

Be sure to look through the baby wipes product information before purchasing. Including production date, manufacturer, factory address, telephone number, shelf life, active ingredients, production batch number, hygiene license number, implementation hygiene standard number, instructions for use and precautions, etc. These can also understand the quality and credibility of the product from the side. Do not buy if you find information about a product unclear or intentionally vague.

Detail 9: Pay attention to product specifications

The product specification for baby wipes refers to the length and width of a single wipe. For consumers, at the same price, the larger the area of ​​wet wipes is, the more cost-effective it is. Therefore, you can pay attention to this information to enhance the cost-effectiveness of the product.

Detail ten: pay attention to irritation

Be careful not to rub the baby's eyes, middle ears and mucous membranes directly with wet wipes. If the baby's skin is red, swollen, itchy, and other symptoms after using the baby wipes, you should stop using it immediately. If it is serious, you should go to the hospital emergency room, and you need to evaluate the irritation resistance of the baby's skin to the baby wipes, and then decide whether to choose other Brand of baby wipes.